( OUTLET ) LED MAX Tube 9W Crystal 60cm 300º - HIGH LUMINOSITY

 Delivery in 24/48 hours
 Insured warranty
 25 unit(s) per Masterbox
COLOR TEMPERATURE: 3000K/4000K/6000K

The  MAX LED T8 HIGH LUMINOSITY TUBE MAX LED T8 60cm SMD 2835 EPISTAR 150 Lm/W y 9W power is an excellent and economical solution for the replacement of T8 fluorescent tubes. Its direct connection to the mains eliminates the remaining consumption of ballasts and chokes, allowing for longer life, lower maintenance requirements, fast start-up and flicker-free effect. Includes LED starter.

This T8 tube has single-ended connectionwhich is silk-screened. To optimize energy consumption, the starter should be replaced and the ballast of the old fluorescent tubes should be eliminated.  It has a diode Epistar SMD 2835 of 150Lm/W  and high light transmittance glass coating for uniform light distribution. Angle of 300º.

It has a power factor higher than 0.90. It operates at 175-265V and has a CRI higher than 80%. Opal coating that does not produce glare. It also has protection against short circuits and overheating.

Achieve greater savings, avoid light flickering when turning on the luminaire and thus achieve instantaneous lighting with this LED tube.

TECHNICAL DATA SHEET

REFERENCE : SLTB60MAX
Rated power : 9W
Nominal voltage: 175-265V
Light temperature: 4000K-6000K
CRI - Color Rendering Index: 80
Building Material: Glass +PC
Luminosity-Lm: 1170 Lm
Type of LEDs: Epistar SMD 2835
Opening Angle (º): 300º
LED Diode Efficiency (Lm/W): 150Lm/W
Luminous efficacy (Lm/W): 130Lm/W
Bushing: T8
Certificates: CE - ROHS
IP rating: IP20
Estimated Life LED Diode (H): 30.000
Dimensions (mm): 600
Power Factor (PF): 0.95
Working Frequency (Hz): 50/60Hz
Temperature range (ºC): -20°C ~ +55°C
Ignition Cycles: 100.000
Start-up time (s): 0,2s
Additional Information: Connection one end
Energy Class (2021-EU-2019/2015): A++
Warranty years: 3
en_USEnglish