LED Strip 220V | CUT TO SIZE | 120LED/m | 50m | SMD 2835 | 1000Lm | 10W/M | CRI90 | IP65 | Cut 10cm | Cut 10cm

Our strip LED direct to  220V cwith adhesive tape for easy installation NO power supply or power rectifier cable required.. DIRECT TO 220V.

LED strips 220V The intensity (-Dimmables-) can be regulated by TRIACThe 30% to 100% can be dimmed from 30% to 100%.

This LED Strip has 120 FLIPCHIP chips per meter, so we get a uniform light throughout the strip, in addition to having higher performance Lm / W than traditional SMD LEDs.

With its CRI >90 we get the colors look very real. This makes this LED strip perfect for illuminating spaces where we want the colors to look perfect.

The LED strip can be cut and joined by the spaces indicated on the strip (copper junction area), always following the relevant instructions (be careful that the soldering iron maintains a brief contact with the strip when soldering, as excessive heat will damage the driver).

This LED coil is NOT submersible, the connection is at one end directly to the current with a maximum of 50m per connection.

In order to increase the life of the LED strip, the following should be considered when installing it recommended use the heat sink tape double-sided, as well as to place it on aluminum profilefor proper heat management of the LED strip itself.

The LED strips are ideal for lighting any type of corner or element of your business and your home, thanks to its flexibility. It can be said that one of its main advantages is the great versatility of uses that can be given, since they can be installed in any area and adapt to any corner, and thus be placed in any position, for its adaptable linear design.

Uses of LED Strip 220V | CUT TO SIZE | 120LED/m | 50m | SMD 2835 | 1000Lm | 10W/M | CRI90 | IP65 | Cut 10cm

• In libraries
• Bars
• Home
• Restaurants
• Covers
• Retailers

TECHNICAL DATA SHEET