100W HALLEY BRIDGELUX LED Streetlight HALLEY BRIDGELUX Chip 150lm/W - Twilight Sensor
HALLEY 100W LED streetlight with twilight sensor, that turns on and off automatically according to the level of natural light. This sensor allows you to turn on the lighting automatically, both indoors and outdoors, at dusk and turn it off automatically at dawn. This allows your installation to know if there is no light outside and to be able to automate the lighting of your installation to a greater extent. The range of sensitivity regulation that supports ranges from 6 Lux to 50 lux.
Operation:
The sensor detects the moment of sunset or dusk (reduction of the light level) and provides power (220Vac phase) at the output to connect the LED lamps. In the same way, the sunrise interrupts the connection at the power output with the consequent disconnection of the LED lamps.
This product is designed with electronic circuitry with photodiode sensor and a lightning arrestor (MOV) is provided. Its faster response with 3-20 seconds time delay offers an easy to test function.
Equipped with 3030 SMD diodes Bridgelux high luminosity, offers a powerful and uniform illumination in outdoor public lighting spaces. ENEC 05 certified, it guarantees quality and safety. Bring efficiency and reliability to your outdoor lighting projects with HALLEY.
It stands out for its high impact resistance, with IK10 grade.
In addition, thanks to its IP66 protection, it is protected against any weather change, without affecting its lighting function.
The HALLEY LED street lighting luminaire will allow you to maintain a good lighting with a contained consumption. The operating cost is lower as there are no starters or electronics to replace.
Built for a long life of over 50,000 hours, the HALLEY 100W LED street light has a 5-year warranty for its high quality power supply, durability and design.
It has a 60 mm diameter round swivel connector, with 2 pressure screws to fix it to the column.
Uses of the 100W HALLEY BRIDGELUX LED Streetlight HALLEY BRIDGELUX Chip 150lm/W - Twilight Sensor:
- Street lighting
- Gardens and paths
- Parks and squares
- Sports Center
- Parking lots
Product Data Sheet
REFERENCE
- SP3100W-SENSOR
Nominal Power
- 100w
Nominal Voltage
- 85-265V
Light Temperature
- 3000K - 4000K
CRI -Cromatic Reproduction Index
- 70
Building Material
- Aluminum
Luminosity-Lm
- 15000Lm
LED Type
- SMD3030 Bridgelux
Opening Angle (º)
- 150º x 90º.
LED Diode Efficiency (Lm/W)
- 160 Lm/w
Luminous Efficacy (Lm/W)
- 150 Lm/W
Certificates
- CE-RoSH-TÜV-ENEC
IP Rating
- IP66
Measurements (Mm)
- 623mmx200mm - Tube hole 63Ømm
Power Factor (PF)
- 0,95
Working Frequency (Hz)
- 50/60Hz
Temperature Range (ºC)
- -20°C ~ +55°C
Start-up time (S)
- 0,2s
Impact Protection (IK)
- IK10
Driver Included
- EDISON
Energy Class (2021-UE-2019/2015)
- A
Energy Class (2023 - EU-2019/2015)
- C
Warranty Years
- 5
Accessories & Complements
- Twilight Sensor