PART NUMBER: SLRC-SMARTDRIVER

With our Remote control exclusively for our SMART Driver you can control all functions: on/off, power consumption, brightness, selection of the desired light color.

This remote control is ONLY valid for our Smart WIFI Driver.

Remote Control for WIFI Smart Driver

With a single control control panel you will be able to control all your LED luminaires with Smart Driver.

What can you do with the Smart LED control for our Smart Driver?

• You can increase / decrease the luminous intensity and thus the watts consumed (Brightess).
• You can select the temperature of the light you need (6000K-4000k-3000K).
• The remote control has memory. The luminaire will turn on maintaining the brightness and color temperature at which it was turned off.

 

Configuration of the Smart Driver with the remote control: 

 

1. Connect the LED Panel with the Smart Driver to the power supply.
2. Turn on and off 5 times
3. LED Panel will blink 1 time
4. Press the ALL key for 3 seconds
5. Switching off the panel with the remote control
6. From this moment on, the Remote Control is linked to the Smart Driver.

SCENE:
User-defined brightness and color temperature can be quickly programmed. The user holds down the A or B key and waits for the indicator light to come on, then the current brightness and color temperature information is stored in the lamp, and the user can press the A or B key for a short period of time to bring up the stored content. (Note: The remote control is used to control all lights in a room).

GROUPING:
Press key 1.2.3 for each group of lights. Press all to select all lights. When users are grouped, they should turn off all lights until they discharge, between 1 and 5 seconds, and then set the room to learn.

When a group of lamps is switched on in the room, press and hold key 1 or (2,3) to wait for the lamps to flash, then the grouping can be completed.

When using, short press the 1 or (2,3) key to select 1 or (2,3) group of lights, and then, users can use the functions of on/off, dimming and CCT adjustment.

COPY THE REMOTE CONTROL:
Code (copy) between one remote control and the other remote control.

1-First press and hold the power button + warm button of the new remote control, wait for the indicator light to turn on, the new remote control enters the receiving mode, release the new remote control and then press the old one briefly any key on the switch, the dimming and color temperature of the remote control can be copied.

If you press the OFF key briefly after completing the above operations, the remote control can exit pairing or wait 10 seconds for the remote control to automatically exit replication.

With the WIFI Smart Driver Remote Control you will be able to control the luminaire at will thanks to its functions.

In FactorLED we ensure that our products have QUALITY guarantee and offer all the necessary elements for DISTRIBUTION, IMPORT or WHOLESALE, including the technical data sheet of each LED product.

TECHNICAL DATA SHEET