LED Strip 220V | CUT TO SIZE | 120 LED/m | 50m | SMD2835 | 1800Lm/W | 14W/M | CRI80 | IP67 | Cut every 10cm | Cut every 10cm

Our SMD2835 LED strip  direct to 220V with adhesive tape for easy installation NO power supply or power rectifier cable required.. DIRECT TO 220V.

This LED strip has 120 FLIPCHIP chips per meter, so we get a uniform light throughout the strip, in addition to having higher performance Lm / W than traditional SMD LEDs.

With its CRI >80 we get the colors look very real. This makes this LED strip perfect for illuminating spaces where we want the colors to look perfect.

To facilitate its operation, this strip can be cut and joined by the spaces indicated on it (copper junction area), always following the relevant instructions (be careful that the soldering iron maintains a brief contact with the strip when soldering, since excessive heat will damage the conductor).

This LED coil is NOT submersible, the connection is at one end directly to the current with a maximum of 50m per connection.

In order to increase the life of the LED strip, the following should be considered when installing it recommended use the heat sink tape double-sided, as well as to place it on aluminum profileThe LED strip can be installed both indoors and outdoors thanks to its heat protection. It can be placed both outdoors and indoors thanks to its protection. IP67.

The LED strips are ideal for lighting any type of corner or element of your business and your home, thanks to its flexibility. It can be said that one of its main advantages is the great versatility of uses that can be given, since they can be installed in any area and adapt to any corner, and thus be placed in any position, for its adaptable linear design.

Uses of LED Strip 220V | CUT TO SIZE | 120 LED/m | 50m | SMD2835 | 1800Lm/W | 14W/M | CRI80 | IP67 | Cut every 10cm | Cut every 10cm

• In libraries
• Bars
• Home
• Restaurants
• Covers
• Retailers

TECHNICAL DATA SHEET