PACK 5- Bombillas LED RGB Sumergible 36W PAR56 – DC12V – IP68 – Acero316 – IK10

The bulb LED – RGB – para piscina from 36w de potencia se caracteriza por su lente de óptica soldada por fricción, especialmente desarrollada para la iluminación subacuática, distribuye la luz alrededor de la piscina de manera uniforme y excelente sin deslumbrar a los bañistas, lo que hace de la lámpara un luz fiable y eficiente para su funcionamiento.

One of the problems that often arise with surface luminaires made of plastic or glass, is that they tend to break by blows under water in swimming pools; being a product IK10 manufactured in steelThis problem of breakage due to shocks is solved.

With body made of high-strength 316 stainless steel that withstands salinity. 316 steel is a type of austenitic stainless steel containing chromium, nickel and molybdenum as main alloying elements. This type of stainless steel is highly resistant to corrosion and oxidation in highly aggressive, chlorine and saline environments. Steel 316 has advantages over other types of steel in saline or chlorinated water applications:

• Corrosion resistance: 316 steel contains molybdenum, which makes it highly resistant to corrosion in salt water environments. This makes it ideal for use in marine equipment, and other components that will be exposed to corrosion.
• Oxidation resistance: 316 steel is highly resistant to rust in salt water environments due to its chromium content. This means that it will not rust or corrode easily, extending the life of the material.
• Easy maintenance: 316 steel is easy to clean and maintain, making it ideal for applications in marine environments. The surface of 316 steel is smooth, which prevents the accumulation of dirt and other contaminants.
• High mechanical strength: 316 steel is highly resistant to deformation and breakage due to its high mechanical strength. This makes it ideal for use in applications where it can be subjected to shocks such as swimming pools.

Controladora RGB + Control Remoto included in each lamp:

• Each bulb comes with its own controller, so you don't have to worry about anything. Just connect to 12V DC.
• Each bulb incorporates its own remote control, which have the same frequency as the bulbs, so with a remote control you can control and program the different RGB lamps remotely.

Installation instructions:

Ensure that the pool's electrical system meets all requirements of all applicable local codes, regulations and legal standards.

1. Remove the screws and remove the pool wall assembly.
2. Remove the screws and separate the parts of the assembly.
3. Remove the old luminaire by cutting the power supply wires, always respecting the polarity. Protect and waterproof the connection
4. Coil the excess cable inside the niche and place the spotlight in the niche, making sure that all parts fit evenly.
5. Replace the screws
6. Replace the niche in the wall, verifying if necessary the watertightness according to the installation you have.
7. Replace the cover and replace the screws.

NOTICE: Do not connect your new underwater light to the wrong voltage, you may lose your warranty and damage your electrical system. This light operates at DC12V and requires a minimum power supply of 60W. Do not turn on the underwater light without being fully submerged in water, this light is designed to operate only submerged in water.

The LED luminaire is rated IP68This makes it completely water and dust resistant, and it can be submerged in water for prolonged periods of time.

High LED technology that offer excellent illumination and savings of up to 90% of electricity consumption.

They offer an extraordinary lighting atmosphere, being the perfect option to replace traditional incandescent bulbs in swimming pools, fountains or similar.

• Energy efficiency superior to any traditional incandescent halogen.
• Light beam free of UV or IR rays.
• Low operating temperature.
• Improve pool safety by making the pool more visible at night or in low light conditions.
• Help swimmers see better in the pool, which can reduce the risk of accidents or injuries.
• Its decorative use will give more category and revalue the property.

Needs feeding DC12V not included in the product.

PAIRING OF THE LUMINAIRE AND THE CONTROLLER BY REMOTE CONTROL.

1.- Install the batteries in the remote control.

2.- Make the controller connections according to the image indicated in the instructions manual.

3.- Turn on the power supply to the luminaire from the power switch.

4.- Within 3 seconds after powering on, press the power button on the remote control for 15 seconds.

5.- Release the power button.

6.- If the recognition was successful, the luminaire should respond to the remote control commands. If it was not, prior to a new attempt, perform the action of deleting the recognition of the luminaire by the remote control, as indicated below:

Remote control pairing deletion

1.- Cut off the power supply from the power supply.

2.- Turn on the power supply from the mains power supply.

3.- Within 3 seconds after powering on, press and hold the power off button on the remote control.

4.-The luminaire will turn off and on, indicating that the recognition has been cleared. Release the OFF button.

5.-If the deletion was successful, the luminaire does not respond to the remote control commands.

ADDITION OF THE LUMINAIRE TO THE APPLICATION (TUYA SMART / SMART LIFE).

1.- Verify that the Bluetooth function is enabled in the cell phone.

2.- Download and install the application you have chosen to operate the luminaire (Tuya Smart or Smart Life) on your cell phone.

3.- Turn the luminaire on and off from the remote control.

4.- Turn off the power supply to the luminaire from the power switch. Turn on the power supply to the luminaire from the power switch.

5.- Within 3 seconds after switching on, press the ON and OFF buttons on the remote control at the same time.

6.- Keep them pressed until the luminaire flashes, which should occur in 10 to 15 seconds. Repeat steps 3, 4 and 5 if necessary.

7.- Release the buttons and enter the Tuya Smart or Smart Life application (the one you have chosen to manage the luminaire).

8.- With the luminaire flashing, execute "Add device" or "+".

9.- Wait for the application to detect the device.

10.- When it detects it, it will ask you to press "Add". Once added the application will indicate that it was added successfully. Press "Finish" and the device is now added to the application for management.

To manually add the luminaire, you must select "lighting" and "plug (BLE)" and follow the instructions of the application.

IMPORTANT INFORMATION

1.- One controller can support and operate up to 5 luminaires at the same time.

2.- This set of luminaire and controller DOES NOT SUPPORT THE USE OF AMPLIFIERS.

If you need to manage more than 5 luminaires, you must install additional controller(s) distributing the luminaires (up to 5 per controller).

4.- . In case of installing more than one controller, we recommend the use of one power supply for each controller.

5.- The same remote control can operate more than one controller.

6.- A controller can be operated by more than one remote control.

You can search for applications in the store, the controller supports ?TuyaSmart- and ?SmartLife-.

8.- First of all, the controller must be paired with the remote control, and then the luminaire must be added to the application.

Prior to luminaire placement, pair the luminaire and the controller using the remote control; then add the luminaire to the Installed application on the cell phone.

To perform these tasks, the luminaire must be immersed in water using any container that allows this condition to be met.

Applications of Underwater RGB LED Bulb 36W PAR56 - IP68

• Swimming pools
• Jacuzzi
• Ponds
• Sources
• Aquariums

Product Data Sheet

 REFERENCE

PACK5-POOL12-RGB

 Nominal Power

36w

 Nominal Voltage

12V DC

 Light Temperature

RGB (12x3W)

 CRI -Cromatic Reproduction Index

70

 Building Material

Steel + PMMA

 Luminosity-Lm

3600

 LED Type

SMD

 Opening Angle (º)

120°

 LED Diode Efficiency (Lm/W)

140 Lm/W

 Luminous Efficacy (Lm/W)

100 Lm/W

 Certificates

CE - ROHS

 IP Rating

IP68-Outdoor

 Measurements (Mm)

Ø177x13mm

 Additional Information

Wire 2M.

 Energy Class (2021-UE-2019/2015)

A+

 Energy Class (2023 - EU-2019/2015)

F

 Warranty Years

3