Controladora para Bombilla de Acero Piscina PAR56

 

Our controladora está diseñada para ser usada tanto por nuestro mando de control remoto, como por la aplicación TUYA para Gloogle Home y Alexa.

 

Characteristics:

1.- One controller can support and operate up to 5 luminaires at the same time.

2.- This set of luminaire and controller DOES NOT SUPPORT THE USE OF AMPLIFIERS.

If you need to manage more than 5 luminaires, you must install additional controller(s) distributing the luminaires (up to 5 per controller).

4.- En caso de instalar más de una controladora, recomendamos el uso de una fuente de alimentación por cada controladora.

5.- The same remote control can operate more than one controller.

6.- A controller can be operated by more than one remote control.

You can search for applications in the store, the controller supports ?TuyaSmart- and ?SmartLife-.

8.- First of all, the controller must be paired with the remote control, and then the luminaire must be added to the application.

 

Prior to luminaire placement, pair the luminaire and the controller using the remote control; then add the luminaire to the Installed application on the cell phone.

To perform these tasks, the luminaire must be immersed in water using any container that allows this condition to be met.

Necesita alimentación DC12V no incluida en el producto. 

 

PAIRING OF THE LUMINAIRE AND THE CONTROLLER BY REMOTE CONTROL.

1.- Install the batteries in the remote control.

2.- Make the controller connections according to the image indicated in the instructions manual.

3.- Turn on the power supply to the luminaire from the power switch.

4.- Within 3 seconds after powering on, press the power button on the remote control for 15 seconds.

5.- Release the power button.

6.- If the recognition was successful, the luminaire should respond to the remote control commands. If it was not, prior to a new attempt, perform the action of deleting the recognition of the luminaire by the remote control, as indicated below:

 

Remote control pairing deletion

1.- Cut off the power supply from the power supply.

2.- Turn on the power supply from the mains power supply.

3.- Within 3 seconds after powering on, press and hold the power off button on the remote control.

4.-The luminaire will turn off and on, indicating that the recognition has been cleared. Release the OFF button.

5.-If the deletion was successful, the luminaire does not respond to the remote control commands.

 

ADDITION OF THE LUMINAIRE TO THE APPLICATION (TUYA SMART / SMART LIFE).

1.- Verify that the Bluetooth function is enabled in the cell phone.

2.- Download and install the application you have chosen to operate the luminaire (Tuya Smart or Smart Life) on your cell phone.

3.- Turn the luminaire on and off from the remote control.

4.- Turn off the power supply to the luminaire from the power switch. Turn on the power supply to the luminaire from the power switch.

5.- Within 3 seconds after switching on the remote control, press the ON and OFF buttons simultaneously.

6.- Keep them pressed until the luminaire flashes, which should occur in 10 to 15 seconds. Repeat steps 3, 4 and 5 if necessary.

7.- Release the buttons and enter the Tuya Smart or Smart Life application (the one you have chosen to manage the luminaire).

8.- With the luminaire flashing, execute "Add device" or "+".

9.- Wait for the application to detect the device.

10.- When it detects it, it will ask you to press "Add". Once added the application will indicate that it was added successfully. Press "Finish" and the device is now added to the application for management.

To manually add the luminaire, you must select "lighting" and "plug (BLE)" and follow the instructions of the application.

 

IMPORTANT INFORMATION

1.- One controller can support and operate up to 5 luminaires at the same time.

2.- This set of luminaire and controller DOES NOT SUPPORT THE USE OF AMPLIFIERS.

If you need to manage more than 5 luminaires, you must install additional controller(s) distributing the luminaires (up to 5 per controller).

4.- . In case of installing more than one controller, we recommend the use of one power supply for each controller.

5.- The same remote control can operate more than one controller.

6.- A controller can be operated by more than one remote control.

You can search for applications in the store, the controller supports ?TuyaSmart- and ?SmartLife-.

8.- First of all, the controller must be paired with the remote control, and then the luminaire must be added to the application.

Prior to luminaire placement, pair the luminaire and the controller using the remote control; then add the luminaire to the Installed application on the cell phone.

To perform these tasks, the luminaire must be immersed in water using any container that allows this condition to be met.

 

Aplicaciones de la Controladora para Bombilla de Acero Piscina PAR56

• Swimming pools
• Jacuzzi
• Ponds
• Sources
• Aquariums

Product Data Sheet

 REFERENCE

CONTROL-POOL-RGB

 Nominal Power

12V: 144W – 24V-288W

 Nominal Voltage

DC 12V

 Building Material

Thermoplastic

 Certificates

CE - ROHS

 IP Rating

IP20

 Measurements (Mm)

25x47x85 mm

 Working Frequency (Hz)

2.4Ghz

 Warranty Years

3

 Scope (M)

30m